1/2-13 x .650, End force - 10 lbs., Steel Body/Nose, Hex Drive Handle, Standard, Locking, Hand Retractable Spring Plunger (1 Each)

1/2-13 x .650, End force - 10 lbs., Steel Body/Nose, Hex Drive Handle, Standard, Locking, Hand Retractable Spring Plunger (1 Each) Reviews

Other Picture

Hand Retractable Spring Plungers - Inch and Metric Steel and Stainless Steel - Hex Drive Handle - Locking Steel CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 30, 2011 16:35:05

M4 x 0.7 x 9mm, End force - 10 Newtons, Metric, Stain. Steel Ball, Steel Body, Standard, Ball Plunger (1 Each)

M4 x 0.7 x 9mm, End force - 10 Newtons, Metric, Stain. Steel Ball, Steel Body, Standard, Ball Plunger (1 Each) Reviews

Other Picture

Ball Plungers - Inch and Metric Steel and Stainless Steel Bodies with or without Nylon Locking Element - Steel Bodies CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 29, 2011 20:46:03

6-32 x .375, End force-3 1/2 lbs., Inch, Steel Nose-Heavy End Pressure, Steel Body, Locking Element, Stubby Spring Plunger (1 Each)

6-32 x .375, End force-3 1/2 lbs., Inch, Steel Nose-Heavy End Pressure, Steel Body, Locking Element, Stubby Spring Plunger (1 Each) Reviews

Other Picture

Stubby Spring Plungers - Stainless Steel Bodies Stainless Steel or Delrin Nose With or Without Nylon Locking Element - Combines the short body of a ball plunger with the long nose of a spring plunger. Used where space is restricted, but where appreciable plunger travel and high end pressures are required. Plunger telescopes completely. Class 2A threads. Permits use where mating surfaces must be flush. Steel noses are case hardened. Stainless passivated. Delrin nose offers long life and high resistance to repeated impacts, moisture and solvents and heat up to 190?F. Delrin plunger has electrical insulating properties and will not mar soft metals such as brass and aluminum. Has self-lubricating surface. Metric dimensions are in millimeters. Metric end forces are shown in Newtons. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 27, 2011 22:54:03

De-Sta-Co Horizontal Handle Hold-Down Clamp, Flange base, w/150 lbs. cap., Steel (1 Each)

De-Sta-Co Horizontal Handle Hold-Down Clamp, Flange base, w/150 lbs. cap., Steel (1 Each) Reviews

Other Picture

Safety designed to give more hand clearance between the bar and handle when clamps are in full, open position. Bar guide feature gives extra lateral support and rigidity to hold-down bar at front of base. Steel series 213, 217, 227, 237 are supplied with neoprene tipped spindle assemblies and flanged washers. Series 245 and all stainless steel clamps are supplied with a hex head spindle assembly. U-bar type.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 26, 2011 17:59:05

De-Sta-Co Vertical Hold-Down Clamp, Vert. Handle, U-bar, Flange base w/200 lbs. cap.-Steel, C=2.73 (1 Each)

De-Sta-Co Vertical Hold-Down Clamp, Vert. Handle, U-bar, Flange base w/200 lbs. cap.-Steel, C=2.73 (1 Each) Reviews

Other Picture

Steel furnished with M6 spindle (TC-202208-M) and lock nuts. U-bar models also include flanged washers.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 25, 2011 17:01:05

1/2-13 x 7/8, End force - 2.00 lbs., Stain. Steel Body, Phenolic Nose, L-Handle, Locking Element, Locking, Hand Retractable Spring Plunger (1 Each)

1/2-13 x 7/8, End force - 2.00 lbs., Stain. Steel Body, Phenolic Nose, L-Handle, Locking Element, Locking, Hand Retractable Spring Plunger (1 Each) Reviews

Other Picture

Hand Retractable Spring Plungers - Steel and Stainless Steel w/Radiused Delrin or Phenolic Nose - With Phenolic Nose - With Nylon Locking Element - L-Handle Locking CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 24, 2011 17:51:13

Vlier SSS49P 6-32 1.5 Lbs Lock Vlier Std Plngr Stainlss

Vlier SSS49P 6-32 1.5 Lbs Lock Vlier Std Plngr Stainlss Reviews

Other Picture

Vlier SSS49P 6-32 1.5 Lbs Lock Vlier Std Plngr Stainlss Feature

• Package Quantity: (1) Piece
• Type: Standard Spring Plunger
• Thread Size: 6-32
• Thread Length (Inch): 17/32
• Decimal Plunger Diameter: 0.045
• Projection (Inch): 1/16
• Material: Stainless Steel
• Initial End Force (Pounds): 0.5
• Locking Element: Yes

Standard - Spring Loaded Devices - Pins & Plungers Type: Standard Spring Plunger Thread Size: 6-32 Thread Length: 17/32 Decimal Plunger Diameter: 0.045 Projection: 1/16 Material: Stainless Steel

Visit Store Now !!

Detail Products

Detail Reviews

Apr 22, 2011 23:45:04

Kaufhof AVU-5522 High Precision Unigrip Drill Press Vise 4 Inch

Kaufhof AVU-5522 High Precision Unigrip Drill Press Vise 4 Inch Reviews

Other Picture

Kaufhof AVU-5522 High Precision Unigrip Drill Press Vise 4 Inch Feature

• Body Length 7-3/4 Inch
• Jaw Opening 4 Inch
• Jaw Depth 1.5 Inch
• Jaw width 4 Inch
• Heavy Duty Construction

A sturdy vice constructed from graded cast iron and designed for use with bench drills and drill presses. Its compact low profile design makes it suitable for a multitude of metal and woodworking applications. The locking spindle moves inside the hollow handle grip allowing the vice to be tightened at any position on the drilling table. Elongated clamping slots also permit rapid adjustment of the vice on the work table. The fixed jaw has three longitudinal and one transversal prisms to facilitate clamping of flat work pieces. The vice features a precision ground base and vice bed for smooth lateral movement of the locking jaw. Rugged Drill Press Vise with removal upper Section Jaws. Recommended Vice for use on Drill Presses, Milling Machines and Grinders. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces. Ground base and Vice bed for extreme accuracy.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 21, 2011 17:49:04

LARGE MOUNTED TOGGLE CLAMP FOR MINI T-TRACK By Peachtree Woodworking - PW1154

LARGE MOUNTED TOGGLE CLAMP FOR MINI T-TRACK By Peachtree Woodworking - PW1154 Reviews

Other Picture

LARGE MOUNTED TOGGLE CLAMP FOR MINI T-TRACK By Peachtree Woodworking - PW1154 Feature

• Large Toggle mounted on 2" x 2" UHMW block with 1/4" bolt.
• Perfect for Mini T-Track on drill press, router table or work bench.
• Slides easily on Mini-T-Track for fast positioning. Mini T-Track sold separately.
• Toggle mechanism allows maximum clearance.

Large Toggle mounted on 2" x 2" UHMW block with 1/4" bolt. The mounted Toggle is perfect for Mini T-Track on the drill press, router table, work bench or anywhere that you use Mini T-Track.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 19, 2011 15:34:06

Gibraltar 10009P-G 1/4-20 7lb Gibraltar St Ball Plunger

Gibraltar 10009P-G 1/4-20 7lb Gibraltar St Ball Plunger Reviews

Other Picture

Gibraltar 10009P-G 1/4-20 7lb Gibraltar St Ball Plunger Feature

• Package Quantity: (1) Piece
• Type: Threaded w/o Locking Element
• Thread Size: 1/4-20
• Ball Diameter (Decimal Inch): .1250"
• Maximum Ball Reach (Decimal Inch): .0350"
• Length (Decimal Inch): .5310"
• Material: Steel
• Ball Material: Steel
• Initial End Force (Pounds): 3.0
• Final End Force (Pounds): 7.0

Ball - Spring Loaded Devices - Pins & Plungers Type: Threaded w/o Locking Element Thread Size: 1/4-20 Ball Diameter: 0.12500 In. Maximum Ball Reach: 0.035 In. Length: 0.531 In.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 18, 2011 10:59:03

Great Neck 59013 2-Inch Ratcheting Clamp Set, 2-Piece

Great Neck 59013 2-Inch Ratcheting Clamp Set, 2-Piece Reviews

Other Picture

Great Neck 59013 2-Inch Ratcheting Clamp Set, 2-Piece Feature

• Lightweight resin construction
• Easy to use ratcheting mechanism for precise holding pressure
• Pivoting jaw nose for greater holding power on flat, round or odd shaped pieces
• Clamps and Holds with Power on Flat, Round and Odd Shaped Pieces
• Pressure Pivoting Jaw Nose

Item 59013: GreatNeck 2 Pc. 2"" Ratcheting Clamp Set. . Lightweight resin construction. Easy to use ratcheting mechanism for precise holding pressure. Pivoting jaw nose for greter holding power for flat, round, or odd shapped pieces

Visit Store Now !!

Detail Products

Detail Reviews

Apr 17, 2011 11:14:04

Bessey TG4.016 4-Inch x 16-Inch Regular Duty Tradesmen Bar Clamp

Bessey TG4.016 4-Inch x 16-Inch Regular Duty Tradesmen Bar Clamp Reviews

Other Picture

Bessey TG4.016 4-Inch x 16-Inch Regular Duty Tradesmen Bar Clamp Feature

• Patented profile rail for total control
• Non-slip locking device for steadfast clamping
• I-beam design for reduced flexing and bending
• Zinc finished drawn rail for durability
• Non-marring pads for a flawless workpiece

This Tradesman Heavy Duty Bar Clamp has a 16" clamping capacity, 1" x 5/16" rail size, 4" throat depth, and nominal clamping pressure of 800 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Visit Store Now !!

Detail Products

• Bessey TG4.008 4-Inch x 8-Inch Regular Duty Tradesmen Bar Clamp
• Bessey TGJ2.524 2-1/2- by 24-Inch Regular Duty Tradesmen Bar Clamp
• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
• Bessey TGJ2.506 2-1/2-Inch x 6-Inch Regular Duty Tradesmen Bar Clamp
• Bessey TG7.016 7-Inch x 16-Inch Heavy Duty Tradesmen Bar Clamp

Detail Reviews

Apr 16, 2011 01:14:04

1/2-13 x 3/4, End force-19.0 lbs., Steel Nose, Steel Body, Short w/Extended Travel, Standard, Stubby Spring Plunger (1 Each)

1/2-13 x 3/4, End force-19.0 lbs., Steel Nose, Steel Body, Short w/Extended Travel, Standard, Stubby Spring Plunger (1 Each) Reviews

Other Picture

Stubby Spring Plungers - Stainless Steel Bodies Stainless Steel or Delrin Nose With or Without Nylon Locking Element - Short Spring Plungers w/Extended Travel - The short spring plunger with extended travel provides the space saving features of a short body, along with the added nose travel of the standard length plunger. The nose travel (C column) and the diameter (D column) are identical to the standard spring plunger, with spring pressures mid range between the light and heavy short spring plunger. All short style plungers have the solid screw driver slot. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 14, 2011 13:52:04